How to Re-Load the Bloodhound Firmware

There are times that it makes sense to re-load the Bloodhound's firmware, usually the
need being related to issue resolution.  This article shows you how to do this quickly
and with ease.

PREREQUISITES:

1)  You must be on-site with the Bloodhound - this exercise is not a remote
     tutorial.

HOW-TO:

1)  Watch the face of the Bloodhound and using both hands, press down all
     eight (8) of the Bloodhound's buttons for a couple of seconds.  If you have done
     this correctly, you should see some activity on the panel to the effect that it is
     loading up the new firmware.
     

2)  Wait for the process to complete (this could take up to a minute or so).

3)  Once the process has completed, look at the Bloodhound's display, and make sure
     that everything looks generally correct.
      

4)  OPTIONAL:  You may reboot the Bloodhound at this point to ensure it is refreshed
       with the new firmware, and a fresh boot.


CONGRATULATIONS!  You have reloaded the Bloodhound's Firmware!